|
|
 Barix Barix R6 |
|
|
 |
 |
| Hardware > Hogar-Digital >
Domotica > Modulos-(Dom) > Barix >
Barix R6
|
|
| Módulo de E/S con interfaz RS-485 y protocolo Modbus/RTU, 6 relés de potencia (230 VAC, 16 A), clasificación UL |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
The Barix R6 is a universal, low cost, small form factor I/O extension device which connects to a host via Modbus/RTU. The six 250V/16A rated relays are controlled using Modbus/RTU commands via the serial interface Special power savings features keep the active power of the device low even if all relays are activated.
Applications
Voice Evacuation Systems with 6 Relays
FEATURES
Relay Output (6)
RS-485 Serial Port (1)
Supply Voltage (9-30V)
Designed in Switzerland and installed in thousands of locations internationally, the Barix control products have poven themselves as a very reliable, versatile product solving interfacing, data collection and control problems effectively, world wide. |
|
| Especificaciones |
|
Relays
• 6 relays (250 VAC 10 A, 16 Amax <1sec) on screw block with common, NO (normally open) and NC (normally closed) contacts
• for wires AWG 26 – AWG 14 / 0.15 – 2.5 mm²
RS-485 / Power / Expansion
• Power/RS-485 on detachable screw block for wires AWG 28 – AWG 16 / 0.08 – 1.3 mm²
• 2 extension connectors (3"/75 mm cable incl.)
RS-485 / Protocol
• RS-485 (2-wire), 9'600/19'200 Baud, 8 bit, Even/No parity software configurable,
• Modbus/RTU protocol
Misc
• 1 LED for power indication
• 1 LED for RS-485 active send indication
• 6 LED for relay status indication
• Internal connector for default settings jumper
Power supply requirements
• 12 to 24 VAC / 9 to 30 VDC
• 3.5 Watt max. (all relays active)
Case
• high quality plastic, 220 grams, DIN-rail mount.
• 4.13" x 3.34" x 2.83"/105 mm x 85 mm x 32 mm
MTBF
• Min. 237 000h acc. to MIL217F at 25°C ambient temperature |
|
|
| |
|
|
|
