 |
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
The IPAM 102 is a universal, standalone, IP Audio function block which can be easily embedded into OEM products. The module encodes and decodes IP Audio streams from/to analog sources (stereo), an I2S output is also available. Supporting a large range of protocols and codecs the module can be used for both VoIP and IP paging as well as high quality music distribution and IP music streaming applications. Control I/O (two serial ports, digital inputs and outputs) allow the use with UI and control interfaces. Most of the Barix Annuncicom products are based on this module.
Applications
Commercial Audio Streaming Applications
Digital Annunciator, Message Player, Message Repeater
Generic, bidirectional full-duplex VoIP module for Paging and Intercom applications
Source Encoder for IP Audio Distribution Applications
Background Music and Music-on-Hold encoder for VoIP Applications
Low latency IP Audio Encoder for multichannel applications
FEATURES
G711, G.722, PCM Encoding
MP3 Encoding
AACplus, MP3, Ogg Vorbis, G.711, G.722, PCM linear Decoding
Shoutcast/Icecast Source capability
Audio Level Supervision with SNMP Trap generation
IP Streaming via TCP, UDP, RTP, Multicast
Microphone Input
Line Level Input (Stereo)
Line Level Output (Stereo)
General Purpose I/O (8)
RS-232 Serial Port (TTL Level)
RS-485 Serial Port (TTL Level)
Supply Voltage (5V)
USB Flash Memory Interface
Designed in Switzerland and embedded in countless OEM products, from certified audio evacuation systems to Broadcast Studio Mixers, the Barix IPAM is the solution of choice for OEMs and product designers who want to add IP Audio capabilities to there devices easily and with simplicity. |
|
| Especificaciones |
|
Electrical
• 5 VDC (-20% / +10%), 1.6 Watt max.
• 3 x 40 pin, high density, 0.8 mm spacing, SMT connectors
Ethernet
• Two 10/100 Mbps (auto) Ethernet: primary with built-in PHY,
secondary intended for redundancy use (MII only, requiring external PHY), outputs for dual color Link/Activity LEDs
Audio Interfaces
• Mic input 111 mVPP max (with Bias power),
• Stereo input 2.2 VPP max, both adjustable in sensitivity
• Frequency response 20 Hz ..20 kHz (-3 dB)*
• Dynamic range 87 dB, SNR -87 dB, THD <0.01% (-3dBFS)*
• Stereo output 3 VPP max, volume, bass and treble adjustable
• Frequency response 20 Hz ..20 kHz (-3dB)*
• Dynamic range 94 dB, SNR -94 dB, THD <0.03% (-3 dBFS)*
• I²S output (Inter-IC Sound)
Audio formats
• PCM, G.711, IPAM 101 encode, decode, IPAM 102 encode, decode
• G.722, IPAM 102 encode, decode
• Ogg Vorbis, MP3, IPAM 101 decode, IPAM 102 encode, decode
• MP3, IPAM 101 decode, IPAM 102 decode
• AAC+ requires separate licensing by OEM
• MP3, encoding/decoding up to 192/320 kbps
• PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
Misc. Interfaces
• Dual TTL Level UART 300..230'400 Baud asynchronous Outputs for 2 dual color Ethernet status LEDs, 8 General Purpose I/Os, 1 input for reset button, 1-wire bus,
• 2 status LED outputs, USB1.1 interface for memory
CPU / Memory
• Integrated CPU / MAC / IO controller with on-chip 256 KB
• RAM, 2 KB EEPROM for configuration, 2 MB Flash memory
• for system, application, data and web server content
Operating System
• Embedded, robust OS, IP stack with support for TCP/IP, UDP, RTP, SIP, DHCP, Multicast/IGMP
User / Application Interfaces
• Integrated web server (control/configuration),
• browser based, serial or Ethernet control interface,
• programmable software environment
Mechanical
• Weight 14g, 2 mounting holes 2.7mm (for 2.5mm screws)
Dimensions (W x D x H)
• 53 x 39 x 8 mm (2.1 x 1.5 x 0.31 inch)
MTBF
• Calculation acc. MIL217F at 40°C)
• IPAM 101 min. 1 200 000h
• IPAM 102 min. 1 100 000h |
|
Barix IPAM 102 
