| Epiphan VGA2Ethernet
|Hardware > Audiovisuales >
Video-Streaming > Epiphan >
|Transmite señales VGA por la red|
|Garantía del fabricante: 2 años SAT (Servicio Técnico)|
| Hoja de Datos|
| Disponibilidad: ||
|Epiphan VGA2Ethernet™ is a compact external network frame grabber that is capable of capturing single link DVI, HDMI1 and VGA signals at rates of up to 60 frames per second. VGA2Ethernet also supports a stereo 3.5mm audio input. Epiphan Systems VGA2Ethernet uses a common RJ45 10/100/GigE Ethernet port to interface itself with the target computer, allowing for up to 1 Gigabit transfer rates.
Captures and Transmits VGA, DVI or HDMI video source to Ethernet at up to 60fps
Support for 3.5mm stereo audio input
Supports resolutions up to 1920 x 1200
100% lossless signal transfer
Allows you to remotely stream a monitor or projector/beamer over Ethernet
Network frame grabber
Interfaces to multiple 3rd party applications compatible with DirectShow on Windows, QuickTime on Mac OS X and V4L (Video4Linux) on Linux
With a maximum capture resolution of 1920 x 1200, this a compact network frame grabber capable of capturing and sending HDMI, DVI and VGA video display signals to Ethernet. Using the latest state-of-the-art pre-compression technologies developed by Epiphan Systems specifically for the VGA2Ethernet, the user is able to acquire diagnostic-quality 100% lossless images from any DVI/HDMI/VGA/RGB source.
VGA2Ethernet is also able to capture a composite or s-video signal using a converter cable, purchased separately.
VGA2Ethernet is fully compatible with DirectShow in Windows and QuickTime in Mac OS X, meaning that it can be used in conjunction with any third party software that allows the use of an external camera as a video input. Alternatively, the VGA2Ethernet software, available as a free download, supports not only the viewing and saving of the VGA signal as an image or video, but also allows the user to:
Setup an automated or periodical "save" command
Send the DVI/HDMI/VGA output to an attached paper printer
Broadcast and share the VGA, DVI or HDMI over network.
Archive the VGA/DVI/HDMI output in a variety of formats, including JPEG, PNG, BMP, AVI, and MP4
An SDK, API, and examples are available free of charge for those users wishing to integrate the VGA2Ethernet into their custom applications developed for Windows and Mac OS X.
Learn more about how to send VGA/DVI/HDMI to Ethernet with this powerful network frame grabber
|Interface RJ45 Gigabit Ethernet
Two DVI-I (digital + analog) connectors
Two Ethernet RJ45 connectors
One 3.5mm audio input
One 5V DC power supply connector
R,G,B plus separate HSYNC and VSYNC signals
R,G,B plus CSYNC signal
R,G,B with Sync-On-Green synchronization
HSYNC rate is between 15 KHz and 150 KHz
Pixel rate between 12 MPixel/s and 270 MPixel/s for non-interlaced grab.
Pixel rate is between 165 MPixel/s and 330 MPixel/s for two consequent frame interlaced grab.
Color Resolution RGB24 (8:8:8), RGB16 (5:6:5), RGB8 (2:3:3), YUY2, UYUV
Supported VGA Modes
VESA modes: 720×400, 640×480, 800×600, 1024×768, 1152×864, 1152×900, 1280×960, 1280×1024, 1600×1200, 1920×1200.
Custom VGA modes.
Update Rate Frame rate varies depending on content
Resolution Frame Rate
640×480 28.0 – 60.0 fps
800×600 18.0 – 30.0 fps
1024×768 13.0 – 30.0 fps
1280×1024 8.0 – 30.0 fps
1920×1080 5.0 – 36.0 fps
Video Format Options RGB plus HSync and VSync (5 wire)
Composite Video PAL, NTSC. Standard definition @ 25fps
Additional Features Internal 2-port Ethernet hub
Three LED to indicate the status of the VGA2Ethernet (power, readiness, and operation in progress)
Windows 2000, XP, Vista, Windows 7 (i386, x64)
Mac OS X 10.4 and up (ppc, i386, x86_64)
Linux (x86, x86_64)1
DirectShow (Windows) and QuickTime (Mac OS X) integration
Dimensions 7.95"×4.13"×1.38" / 202×105×35 mm
Weight 1.4 lb, 635 g