Sistematics.com: Comprar material informático, audiovisual y de telecomunicaciones con las mayores garantías. Asesoramiento profesional, entregas urgentes, soporte técnico propio.
Teléfonos de Atención al Cliente de Sistematics. Llámenos para realizar cualquier consulta preventa, postventa, tramitar un pedido, etc.
Sistematics:Comprar material informático, audiovisual y de telecomunicaciones con las mayores garantías
Marcas
Hardware
Equipos
Periféricos
Multimedia
Integración
Almacenamiento
Comunicaciones
Conectividad
Redes
Seguridad
Hogar Digital
Audiovisuales
Mobiliario
Accesorios
Consumibles
Repuestos
OCASIÓN
Software
Ofimática
Sistemas Operativos
Gestión
Seguridad
Utilidades
Servicios
Mantenimiento
Internet
Recuperación
Backup
Soluciones
Formación
Gestión Documental
Gestión de llaves

  Planet Technology POE-100SK 
Hardware > Redes > Cobre > Inyector-POE > Planet-Technology > POE-100SK
Power Over Ethernet Adapter Kit
Garantía del fabricante: 2 años SAT (Servicio Técnico)
Hoja de Datos
Disponibilidad: Producto con reposición alta, 24/72h
   Características
Using the PLANET PoE adapters, you can power most DC network devices such as hubs, Wireless access points, IP cameras and etc., over the same Cat 5/5e cable used to connect the device to the network.

When positioning network devices, system designers always have to consider the location of power outlets. In some cases, this will restrict the optimum placement of devices or incur additional cost in installing new outlets. Planet's PoE solution addresses these problems.

The PoE product includes two units: an Injector and a Splitter. An Injector inserts current into the unused wires in a standard network cable (pins: 4, 5, 7 and 8) allowing the cable between the Injector and the Splitter to transfer power and network signals simultaneously. The maximum distance between the Injector and Splitter can reach 100m/328ft, as defined by the IEEE 802.3 standard.

By eliminating the need for power cords, PoE has following benefits:

Cost saving
The cost of deploying PoE is much lower than a traditional electrical circuit.

Ease of network planning
The system designer has more flexibility to locate network devices. Independence from power outlets makes it easier to relocate devices or obtain the best performance, e,g: fine-tuning the RF coverage of an AP.

Steady Wireless LAN connectivity
PoE allows a Wireless Access Point to be placed close to the antenna, thus avoiding signal loss over antenna cable.

Where the Installation site of a network device is not close to a power outlet. Used with a Wireless Bridge, Access Point, Internet Camera or other device which requires an external DC power adapter. The basic connection structure is shown beside.

As illustrated below. The Wireless Access Point in a warehouse must be installed on the roof so that all computers can make use of it. Another AP on the second floor of an office building also has to find an optimal position to provide service to all PCs on the same floor. Moreover, an Internet Camera is installed on the left side of the building for security surveillance. In the past, system designers are forced to place these devices close to power outlets, and perhaps, sacrifice performance or reliability. Using PoE, you can implement a high performance network without incurring additional costs by requiring addition or reloacation of power outlets.
   Especificaciones
Model POE-100 / POE-100S
Category 5 pin power usage -: Pin 4, 5 +:Pin 7, 8

Output voltage, current
POE-100S-5V : DC 5V , 2A
POE-100S-9V : DC 9V , 1.2A
POE-100S-12V: DC 12V, 1A

Ethernet connector RJ-45
Ethernet data rate 10/100Mbps
Number of devices that can be powered 1
Ethernet data cable TIA/EIA-568, Category 5/5e cable
Dimensions (W x D x H) 64.5 x 42.3 x 20.4 mm
Emission FCC class B, CE-mark
 
Precio: 31 €
Buscador en Sistematics Buscador
Ver Cesta de la compra Mini Cesta
8-( ... está vacía!
Lo + Vendido
Lo + Vendido
Suscripción al Boletín
Garantía de 2 años