|
|
 Alphatech Brave SlimDP 01A |
|
|
 |
 |
| Hardware > Comunicaciones >
Intercomunicadores > Intercomunicadores-de-Boton > Alphatech >
Brave SlimDP 01A
|
|
| Superficie analógico ultrafino, 1 botón, 1 relé con amplificador (Requiere alimentador) |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
|
Disponibilidad:  |
|
| |
|
| Características |
|
Voice communication is powered from a telephone line;
Impulse and tone (DTMF) options;
Storage of 2 24 - digit long numbers per button (including* , #, Flash and pause);
Option to prolong a call with * or #;
Option to connect one ectronic locks, to open doors
Potential to use up to 6 relay regimes (for electrical lock, an additional bell, lighting etc.);
Two codes to disconnect the Door Entry System from a phone;
One code to open doors from the phone for 1 -impulse and one
code for 2-impulse;
3 x 6 code locks for relay (password from door buttons);
Can be connected electrically secure lock on the switch (serial
activation code)
Option to disconnect a call by the repeated pressing of a button;
Option to switch on a „baby call‟ regime (no number dialling);
Option to switch on a regime to suppress the DTMF connection from
the microphone;
Option to switch on a „ticking‟ sound into a call to announce another
call;
Option to switch on acoustic signalling for relay connection;
Option to set the number of rings before connecting a call;
Programmable parameters for tone options Flash length and Pause
length;
Programmable parameters for acoustic signalisation;
Programmable parameters for tone detection;
Electronic volume setting without the need to open the front cover;
Version A is with integrated 1W amplifier
Programmable with PC, via USB cable, and remote DTMF
programming;
Integrated regulated heating of the PCB |
|
| Especificaciones |
|
Minimum line current 18mA
Minimum line voltage 18V
Voltage on the line when Brave picks up (VA characteristic)
< 8V / < 12V
Lead in in disconnected state <30uA
Impedance of line ending 220R +, 820R paral. 115nF
Bandwidth 300Hz – 3400 Hz
Impendence of ringing > 2Kohm
Sensitivity of ringing detector min. 10 – 25 V
Impulse choice 40 / 60 ms
Level of tone choice - 6 a - 8 dB
Sensitivity of tone choice min. -40 dB
Sensitivity of tone detector min.-30 dB
Power supply for name tag back lighting, relay, heating and
current circuit for exit button 12V DC(12V - 24V) , 12V AC(10V -18V)
Max off take of backlighting and heating 250mA
Max. Voltage of relay contact 48V
Max. Current of relay contact 1,5A
Operating temperature -20 to + 60 st.
Level of cover IP45 |
|
|
| |
|
|
|
