|
|
 Apro SBMSM008G-JDCMM |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-SATA-Flash-Vertical > Apro >
SBMSM008G-JDCMM
|
|
| Hermes-D Series Standard Grade 0ºC-70ºC Mini SATA / 8GB |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
> MLC-NAND type flash technology
> mSATA module compatible with JEDEC standard: MO-300A specification
> Compliant with SATA 1.0a and SATA 2.6 specification
> Supports write protect function by switch
> Bootable for O.S. insatallation
> Maximum sequential read speed 132.5 MB/sec
> Maximum sequential write speed 117.9 MB/sec
> Capacity from 2GB up to 32GB |
|
| Especificaciones |
|
> Compatibility :
- SATA 1.0a and SATA 2.6 specification compliance
- Compliant with ATA/ATAPI7
> Flash Technology : MLC-NAND type flash based
> Form-factor : Standard mSATA form factor compliant with JEDEC MO-300A specification
> Host Interface : mSATA mini form factor with mini-PCIe connector
> Perfromance :
- Data Transfer Rate : Serial ATA Gen-I (1.5 Gbits) and Gen-II (3.0 Gbits)
- Sequential read : 132.5 MB/sec (Max.)
- Sequential write : 117.9 MB/sec (Max.)
- Average access time : 0.1ms
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Vibration : 15G compliance to MIL-STD-810F
- Shock : 1500G compliance to MIL-STD-810G
- Altitude : 70,000 feet
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 4,000,000 hours
- ECC : 8 bits or 15 bits per 512 bytes block
- Data Data retention : 10 Years
> Physical specification :
- Weight (max.) : 8.0 g ± 1 g / 0.3 oz.
- Dimension(W x L x H) : 50.80 x 29.8 x 3.20 (mm)
> Write protect function :
- Supports write protect function by switch
> Power consumption :
- +3.3 V ± 5%
- Reading mode : 290 mA (Max.)
- Writing mode : 350 mA (Max.)
- Idle mode : 180 mA (Max.)
> Warranty :
- 2 years warranty for MLC product
> Conformal coating : Wide temperature grade -40°C ~ +85°C with special conformal coating treatment on PCBA. |
|
|
| |
|
|
|
