|
|
 Apro SPAFC001G-HACSCN-UF |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-PCMCIA-ATA > Apro >
SPAFC001G-HACSCN-UF
|
|
| Hermit Series Standard Grade 0ºC/70ºC plastic frame kit / 1GB |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
> SLC - NAND type flash technology
> Compatible with PC card standard and PCMCIA V.2.1
> PCMCIA Type II form-factor
> Optional for standard casing and rugged metal casing
> Compatible with ATA/ATAPI-6 standard
> Data transfer mode support PIO 0~4 and UDMA 0~4
> Performance up to 40MB/sec
> Capacity from 16MB up to 16GB |
|
| Especificaciones |
|
> Compatibility : ATAPI-6 and True IDE mode
> Flash Technology : SLC-NAND type flash based
> Form-factor : PCMCIA Type II form-factor
> Host Interface : Female 68 pins
> Perfromance :
- Data transfer mode : PIO-4 mode or UDMA-4 mode (def.)
- Data transfer rate : 66.6 MB/sec (ATA-5 / UDMA-4)
16.6 MB/sec (ATA-3 / PIO-4)
- Sequential read : 40 MB/sec (Max. / dual CH.)
- Sequential write : 20 MB/sec (Max. / dual CH.)
- Average access time : 0.2 ms (estimated)
> Environmental specification :
- Operating temp. : STD. 0 °C ~ 70 °C / IND. -40 °C ~ +85 °C
- Non-operating temp. : STD. -20 °C ~ +80 °C / IND. -50 °C ~ +95 °C
- Humidity : 10% ~ 95% non-condensing
- Vibration : 15 G compliance to MIL-STD-810F
- Shock : 1,500 G compliance to MIL-STD-810F
- Altitude : 70,000 feet
> Power consumption :
- Power requirement : +5V ± 10% / +3.3V ± 5%
- Reading mode : 124 mA (Max.)
- Writing mode : 121 mA (Max.)
- Idle mode : 1.8 mA (Max.)
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 3,000,000 hours
- ECC : 4 bits per 512 bytes block
- Endurance : > 2,000,000 cycles
> Physical specification :
- Weight (max.) : Standard casing 43.0 g / 1.52 oz
Metal casing 60.0 g / 2.12 oz.
- Dimension(W x L x H) : 85.6 x 54.0 x 5.0 (mm)
> Conformal coating : Option for special request |
|
|
| |
|
|
|
