|
|
 Apro SPCFA032G-JDCMC |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-CFast > Apro >
SPCFA032G-JDCMC
|
|
| Hermes-D Series Standard Grade 0ºC-70ºC / 32GB |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
> SLC-NAND type flash technology
> Compliant CFast??Specification V1.0
> CFast Type I form-factor
> 7-pin (data) + 17-pin (power) CFast interface
> Compatible with ATA/APAPI-7 standard
> Data transfer support UDMA-5 and backward compatible
> Fixed disk type
> Capacity supports 2GB, 4GB, 8GB, 16GB and 32GB |
|
| Especificaciones |
|
> Compatibility :CFA 4.1 / Serial ATA Reversion 2.6 / ATA-7 Standard
> Flash Technology :NAND type SLC flash based
> Form-factor :CFast Type I
> Host Interface :7-pin (data) + 17-pin (power) CFast connector
> Flash technology : SLC-NAND type flash based
> Perfromance :
- Data Transfer Mode Support : PIO 0, 1, 2, 3, 4 / MWDMA 0, 1, 2 / UDMA 0, 1, 2, 3, 4, 5, 6
- Sequential read : 134.0 MB/sec (Max.)
- Sequential write : 112.8 MB/sec (Max.)
- Average access time : 0.1 ms
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Acoustic noise : 0dB
- Vibration : 15G
- Shock : 1500G
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 4,000,000 hours
- Endurance : Greater than 3,000,000 cycles logically contributed by static wear-leveling and advanced bad sector management algorithms
- ECC : Support BCH ECC 16 bits per 1024 bytes
- Data Data retention : 10 Years
> Power consumption :
- Power requirement : +3.3V +/- 5%
- Reading mode : 250 mA (Max.)
- Writing mode : 300 mA (Max.)
- Sleeping mode : 180 mA (Max.)
> Physical specification :
- Weight (max.) : 10.0g / 0.35oz
- Dimension(W x L x H) : 42.8 x 36.4 x 3.5 (mm)
- Based on CFast 1.0 specification, the max. thickness is 3.6mm
> Conformal coating : Option for special request |
|
|
| |
|
|
|
