|
|
 Apro SPMIF016M-HACSCN-4V-U |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-PATA-Flash-44pin-Vertical > Apro >
SPMIF016M-HACSCN-4V-U
|
|
| Hermit Series Standard Grade 0ºC-70ºC UDMA-4 mode/ 16MB |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
> SLC-NAND type flash technology
> Standard 40/44-pin female IDE connector
> Compact form-factor in vertical type and horizontal type
> Master / Slave selectable by switch
> Compatible with ATA/APAPI-6 standard
> Data transfer mode support PIO 0~4 and UDMA 0~4
> Performance up to 40MB/sec
> Capacity from 16MB up to 16GB |
|
| Especificaciones |
|
> Compatibility :ATA/ATAPI-6 Standard
> Flash Technology :NAND type SLC flash based
> Form-factor :Vertical type or Horizontal R / L types ; Female 40 or 44 pins
> Perfromance :
- Data Transfer Mode Support : PIO 0, 1, 2, 3, 4 / MWDMA 0, 1, 2 / UDMA 0, 1, 2, 3, 4
- Sequential read : 40 MB/sec (Max. /with dual flash)
- Sequential write : 20 MB/sec (Max. /with dual flash)
- Average access time : 0.2ms (estimated)
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Acoustic noise : 0dB
- Vibration : 15G
- Shock : 1500G
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 3,000,000 hours
- Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad sector management algorithms
- ECC : Enhanced management 4-bits per 512bytes block
- Data Data retention : 10 Years
> Power consumption :
- Power requirement : +5V +/- 10%
- Reading mode : 128 mA (Max.)
- Writing mode : 118 mA (Max.)
- Sleeping mode : 1.8 mA (Max.)
> Warranty :
- 3 years warranty for SLC standard grade
- 5 years warranty for SLC industrial grade
> Conformal coating : Option for special request |
|
|
| |
|
|
|
