|
|
 Apro SPMSF004G-JDCMM-VS |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-SATA-Flash-Vertical > Apro >
SPMSF004G-JDCMM-VS
|
|
| Hermes-D Series Standard Grade 0ºC-70ºC Micro SATA / 4GB MLC |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
> MLC-NAND type flash technology
> Standard 7 pins SATA female connector
> Form-factor support vertical type & horizontal type bare low profile w/mounting hole
> High speed item (plastic casing) : 4GB ~ 128GB (Quad CH.)
> High speed item supports write protect function
> Power request optional: Built-in power pin-7 (w/fuse) or 5V power input power cable (w/o fuse)
> Performance up to 124.0 MB/sec (Quad CH.)
> Performance up to 73.0 MB/sec (Single CH.) |
|
| Especificaciones |
|
> Compliant with Serial ATA standard rev. 1.0a and 2.6
> Flash Technology : NAND type MLC flash based
> Form-factor :
- vertical type standard & horizontal type bare low profile w/mounting hole
> Perfromance :
- Data Transfer Rate : Serial ATA standard Gen1(1.5Gbps) and Gen2 (3.0Gbps)
- Sequential read : 124.0 MB/sec (Quad CH. Max.)
- Sequential write : 73.0 MB/sec (Quad CH. Max.)
- Average access time :0.2ms (estimated)
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Vibration : 15G
- Shock : 1500G
- Altitude : 70,000 feet
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- ECC : Enhanced management 16 bits per 512bytes block
- Data Data retention : 10 Years
> Power consumption :
- 5V±10% Build-in power pin-7(w/fuse)
- 5V power input power cable(w/o fuse)
- Reading mode : 212.0 mA (Max.)
- Writing mode : 254.0 mA (Max.)
- Idle mode : 128.0 mA (Max.)
> Warranty :
- 2 years warranty for MLC product
> Conformal coating : Wide temperature grade -40°C ~ +85°C with special conformal coating treatment on PCBA. |
|
|
| |
|
|
|
