|
|
 Apro SPMSF016G-JDCMC-VS |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-SATA-Flash-Vertical > Apro >
SPMSF016G-JDCMC-VS
|
|
| Hermes-D Series Standard Grade 0ºC-70ºC / 16GB |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
> SLC-NAND type flash technology
> Standard 7 pins SATA female connector
> Form-factor support vertical & horizontal
> High speed item (plastic casing) : 2GB ~ 32GB (Quad CH.)
> Normal speed item (w/o casing) : 128MB ~ 8GB (Single CH.)
> High speed item supports write protect function
> Power request optional: Built-in power pin-7 (w/fuse) or 5V power input power cable (w/o fuse)
> Performance up to 131.2 MB/sec (Quad CH.)
> Performance up to 34.5 MB/sec (Single CH.) |
|
| Especificaciones |
|
> Compliant with Serial ATA standard rev. 1.0a and 2.6
> Flash Technology :NAND type SLC flash based
> Form-factor :
- Vertical type : Standard / Low profile
- Horizontal type : Standard / Low profile / Lowprofile with mounting hole
> Perfromance :
- Data Transfer Rate : Serial ATA standard Gen1(1.5Gbps) and Gen2 (3.0Gbps)
- Sequential read : 131.2 MB/sec (Quad CH.)
- Sequential read : 34.5 MB/sec (Single CH.)
- Sequential write : 126.3 MB/sec (Quad CH.)
- Sequential write : 33.01MB/sec (Single CH.)
- Average access time : 0.1ms
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 4,000,000 hours
- Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad
sector management algorithms
- ECC : Enhanced management 16 bits per 512bytes block
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Vibration : 15G
- Shock : 1500G
- Altitude : 70,000 feet
> Power consumption :
- 5V±10% Build-in power pin-7(w/fuse)
- 5V power input power cable(w/o fuse)
- Reading mode : 240.0 mA (Max.)
- Writing mode : 270.0 mA (Max.)
- Idle mode : 150.0 mA (Max.)
> Warranty :
- 3 years warranty for SLC standard grade
- 5 years warranty for SLC industrial grade
> Conformal coating : Option for special request |
|
|
| |
|
|
|
