|
|
 Apro WPCFW001G-HAISIN-UF |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-Compact-Flash > Apro >
WPCFW001G-HAISIN-UF
|
|
| Hermit Series Industrial Grade -40ºC-85ºC plastic frame kit W/WRITE PROTECTION / 1GB |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
> SLC-NAND type flash technology
> Compatible with CompactFlash® specification 3.0
> CompactFlash® Type I form-factor
> Support write protect function by switch
> Compatible with ATA/APAPI-6 standard
> Data transfer mode support PIO 0~4 and UDMA 0~4
> Performance up to 40MB/sec
> Capacity from 16MB up to 4GB
|
|
| Especificaciones |
|
> Compatibility :ATA/ATAPI-6 Standard
> Flash Technology :NAND type SLC flash based
> Form-factor :CompactFlash type I
> Perfromance :
- Data Transfer Mode Support : PIO 0, 1, 2, 3, 4 / MWDMA 0, 1, 2 / UDMA 0, 1, 2, 3, 4
- Sequential read : 40 MB/sec (Max. /with dual flash)
- Sequential write : 20 MB/sec (Max. /with dual flash)
- Average access time : 0.2ms (estimated)
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Acoustic noise : 0dB
- Vibration : 15G
- Shock : 1500G
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 3,000,000 hours
- Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad sector management algorithms
- ECC : Enhanced management 4-bits per 512bytes block
- Data Data retention : 10 Years
> Power consumption :
- Power requirement : +5V + 10% / +3.3V + 5%
- Reading mode : Channel 78mA(Max.) / 2 Channel 124mA(Max.) UDMA4 Mode
- Writing mode : Channel 67mA(Max.) / 2 Channel 121mA(Max.) UDMA4 Mode
- Sleeping mode : Channel 1.2mA(Max.) / 2 Channel 1.8mA(Max.) UDMA4 Mode
> Physical specification :
- Write Protect Function : By switch
- Weight (max.) : 12.0g / 0.42oz
- Dimension(W x L x H) : 2.8 x 36.4 x 3.3 (mm)
> Conformal coating : Option for special request |
|
|
| |
|
|
|
