|
|
 Apro WR2SF064G-JACMC-USE/C |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-SSD-2.5''-SATA > Apro >
WR2SF064G-JACMC-USE/C
|
|
| Bon Series Industrial Grade -40ºC-+85ºC / 64GB MLC Secure Erase Procedure |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 1 año SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
> 2.5” SATA SSD form-factor
> Standard SATA 7 pins (data) + 15 pins (power)
> Automatic 8 bits ECC and retry capabilities
> Supports static wear-leveling algorithms
> Supports Fast Erase by Hardware and Software definition
> Supports Secure Erase by Software ATA command vendor code |
|
| Especificaciones |
|
> Compatibility : Compliant with SATA 1.0a and SATA 2.6 specification
> Form-factor : Standard 2.5” SATA II SSD form-factor
> Host Interface : Standard SATA 7 pins (data) + 15 pins (power)
> Data transfer rate : Serial ATA Gen-I and II (1.5Gb/s and 3.0Gb/s)
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Acoustic noise : 0dB
- Vibration : 15G
- Shock : 1500G
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 3,000,000 hours
- Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad sector management algorithms
- ECC : Enhanced management 8-bits per 512bytes block
- Data Data retention : 10 Years
> Physical specification :
- Weight (max.) : 115 g ± 5 g / 4.06 oz.
- Dimension(W x L x H) : 69.90 x 99.70 x 9.50 (mm)
> Warranty :
- 3 years warranty for SLC standard grade
- 5 years warranty for SLC industrial grade
- 2 years warranty for MLC product
> Conformal coating : Option for special request
> Functionality :
- Hardware : Fast Erase or Secure Erase the media data by hardware trigger
- Software : Fast Erase or Secure Erase the media data by ATA command vender code
> Sanitization Procedure :
- Default sanitizing by erase block data to 0xFF on file table for Fast Erase
- Sanitizing Based on NSA Manual 130-2 for Secure Erase
- Sanitizing Based on USA Air Force AFSSI 5020 for Secure Erase
- Sanitizing Based on DoD 5220.22-M for Secure Erase
- Sanitizing Based on IREC(IRIG)106 for Secure Erase
> Hardware Jumper Setting for Secure Erase & Fast Erase :
 |
|
|
| |
|
|
|
