 |
 |
|
 |
|
| Garantía del fabricante: 5 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
The Best Keeps Getting Better
The 3ware 9650SE PCI Express to SATA II RAID controller pushes LSI established leadership in RAID controller performance to new heights. While 3ware controllers continue to lead the market in RAID 5 performance, the 3ware 9650SE outshines the competition as the
new standard bearer for RAID 6 performance, delivering over 700MB/s RAID 6 reads and 600MB/s RAID 6 writes.
The 3ware 9650SE offers the most comprehensive line of PCI Express controllers, available in both low profile and full height footprints with 2, 4, 8, 12, 16, and 24-port configurations.
All 4-port and above models feature 3ware’s award-winning Multi-lane connectivity. The 9650SE supports RAID levels 0, 1, 5, 6, 10, 50, Single Disk, and JBOD.
Red Hot RAID 6
RAID 6 eliminates the risk of data loss if a second hard disk drive fails while the RAID array is rebuilding. In a 3ware RAID 6 system, two sets of parity are simultaneously calculated, written, and rotated across all the drives. This second parity calculation enables the array to survive up to two drive failures without losing data, significantly improving fault tolerance.
The 3ware parallel XOR RAID 6 parity generation algorithm maximizes RAID 6 throughput, so that RAID 6 enabled 9650SE controllers deliver unequaled RAID 6 performance.
Get Connected via the Multi-lane Expressway
3ware’s award winning Multi-lane high bandwidth SATA connection system is fast, secure, simple, and clutter free. Multi-lane combines
four SATA ports into a single locked connection.
Four lanes of high speed SATA traffic travel through just one cable, significantly reducing the number of cables needed to connect
controllers, backplanes, and standard SATA drives. A 16-port Multi-lane controller needs only four cables, compared to sixteen cables with discrete solutions, for dramatically better reliability, airflow and convenience.
Enterprise-class RAID Storage
The 9650SE’s advanced RAID features, SATA II connectivity, and powerful 3ware performance architecture make it the ideal controller for vertical applications that require the highest levels of sustained write and read performance including NAS storage, web servers, cluster servers, supercomputing, near-line backup and archival, security systems, pro audio and video applications, and other demanding storage applications that need high-bandwidth, highcapacity sequential performance.
n 8th-generation StorSwitch™ non-blocking switched architecture
n On-board I/O RISC processor and RAID offload provides true
hardware RAID
— SCSI device driver model to take advantage of the benefits of
SCSI using inexpensive Serial ATA drives
n Bootable array support for greater fault tolerance of your OS
n Variable stripe size for performance tuning by application
n 64-bit LBA support (greater than 2TB volume)
n ATA pass-through mode support
n Up to 512MB DDR2 533 memory with ECC protection
n 32 pooled DMA channels
n Complete configuration management suite
— 3ware BIOS Manager 2 (3BM2) – easy to use BIOS configuration tool
— 3ware Disk Manager 2 ( ®2) – browser-based management tool
— Command Line Interface (CLI) – scriptable configuration tool
n SNMP support
n SMTP support for email/pager notification
n ATA/6 and Out of band (OOB) staggered drive spin-up support
n Auto carving allows LUNs > 2TB to be divided into multiple units
for legacy operating systems limited to 2TB max. per LUN
n Battery Backup Unit (BBU) support
n Multiple logical unit sizes and RAID levels on one card
n Multiple card support within a system for large storage requirements
n Hot-swap and hot-spare support for data availability
n Dynamic sector repair for robust data protection
n S.M.A.R.T. disk drive monitoring for reliability
n Emergency Flash Recovery protects against failed firmware upgrade
n Drive activity LED support
n Online Capacity Expansion and RAID Level Migration
n Write journaling for improved performance and data protection
against accidental drive removal
n Drive insertion and removal notification
n Array/Drive Status and drive identification LED support (requires
3ware Chassis Control Unit-enabled backplane)
n Chassis Control Unit for enclosure management via I2C
n RoHS compliant |
|
| Especificaciones |
|
Operating System Support
Microsoft® Windows® 2003/XP/2000, Mac OSX, Red Hat Linux,
SuSE Linux, Fedora Linux, 2.4 Linux kernel, 2.6 Linux kernel,
FreeBSD; 32/64-bit driver support for Windows, Linux and
FreeBSD.
n Low profile form factor (2, 4, 8-port configurations)
n Full-height form factor (12, 16, 24-port configurations)
n PCI Express x1, x4, x8 configurations, PCI Express 1.1 compliant
n Serial ATA 2.6 Specification support
n BIOS PnP (plug and play) and BBS (BIOS boot specification) support
n Operating Temperature
Without BBU: 0˚C to 50˚C
With BBU: 10˚C to 40˚C
n Power Requirements: 18W maximum |
|
LSI Logic 3ware 9650SE-4LPML 
