 |
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
The VideoEase Active CCTV Transmitter Balun (500100, 500101) provides enhanced distance performance for a single CCTV video channel via Cat5 unshielded twisted pair (UTP) cable. The balun is installed at the CCTV camera and is powered by the camera power supply. There are two (2) models; 500100 for 12VDC cameras and 500101 for 24VAC cameras. Maximum distance supported ranges from 0 to 3,000 ft via Cat5 UTP when connected to passive CCTV baluns at the receiver. Active CCTV Transmitter Balun features ground loop isolation and manual gain compensation adjustment based on cable length. Applications; Video enhancement for color, sharpness and brightness. Ground loop sensitive installations. Marginal cabling installations.
Low power consumption
Derives power from camera power supply
Ground loop isolation
Gain compensation switch for 500 to 3,000 ft
Fits inside CCTV dome cameras and back boxes.
Works with other MuxLab CCTV baluns
Cable strain relief |
|
| Especificaciones |
|
Environment Video NTSC, PAL, SECAM. CCTV equipment for security and surveillance.
Devices CCTV cameras, DVR, IP camera encoders, monitors, switchers and multiplexers.
Transmission Transparent to the user.
Bandwidth DC to 8 MHz.
Maximum Input 1.2Vp-p unbalanced
Maximum Output +/-5V balanced
Gain 100kHz: Variable from 2dB to 7dB 5MHz: Variable from 13 dB to 40 dB
Return Loss Greater than 15 dB @ 1MHz.
Ground Loop Isolation Isolation between video input and output up to ± 5V
Common Mode Rejection 15 kHz: 60 dB typ 8 MHz: 40 dB typ
Max. Distance Colour – Cat5
Up to 3,000 ft (0m to 914m) with passive balun (500009) at receiver.
Up to 6,000 ft (0m to 1,828m) with active balun (500015 or 500120) at receiver.
Gain compensation switches
Four (4) settings based on cable length.
Factory setting: 750 ft to 1,500 ft (229m to 457m)
Cable – UTP
24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz.
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz
Cable – BNC Impedance: 75 ohms at 1 MHz (RG59/U mini coax).
Connectors Reverse polarity sensitive
BNC-M for video with 8” minicoax lead
2-wire red/black cable lead for input power.
Two (2) screw terminals for video twisted pair
Impedance
Input: 75 ohms (BNC) Output: 100 ohms (screw terminals)
Power requirements
500100: 12VDC @ 60mA max. 500101: Floating 24VAC @ 70mA RMS max. Shares power with camera PSU. Connects to camera’s power terminals.
Power surge protection Surge protection on power input.
Compatibility Compatible with MuxLab CCTV baluns 500009, 500023. 500015, 500130, 500122.
Temperature Operating: 0° to 50° C. Storage:-20° to 85° C. Humidity: up to 95%
Enclosure ABS fire retardant plastic, black
Dimensions 1.25” (3.1 cm) x 0.62” (1.6 cm) x 0.62” (1.6 cm) plus 8” (20.3 cm) minicoax lead
Weight 1.0 oz (28 gms)
Warranty Lifetime
Order Information 500100 Active CCTV Transmitter Balun, 12VDC |
|
Muxlab Active CCTV Transmitter Balun 
