|
|
 Planet Technology FNSW-2400PS |
|
|
 |
 |
| Hardware > Redes >
Cobre > Switches-Web-Smart > Planet-Technology >
FNSW-2400PS
|
|
| 24-Port 10/100Mbps PoE Web Smart Ethernet Switch |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
Cost-effective Edge Network Connection Solution
To provide enhanced network management with cost saving benefit to customers, PLANET releases the new version of the FNSW-2400PS, the Layer 2 Web Smart Switch with PoE injector function. The FNSW-2400PS is equipped with 24 Fast Ethernet ports integrating with PoE injector function. With 125Watts PoE power budget, it provides a compact, affordable, safe and reliable power solution for small to medium enterprises.
IEEE 802.3af Power over Ethernet Support
The PoE in-line power following the IEEE 802.3af standard makes the FNSW-2400PS able to deliver power to 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. It optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and IP Surveillance cameras.With more efficient switching power supply, the efficiency of the FNSW-2400PS would be much better than four linear power adapters in a long run and bring customers the key benefit – energy saving.
Easy Cabling Installation
The Power over Ethernet technology enables the Ethernet wire to carry both data and power. With data and power over Ethernet from one unit, the FNSW-2400PS shall reduce cable installation and eliminate the need for extension cords or dedicated electrical outlets on the wall, ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort.
Friendly Web-Based Management
For efficient management, the FNSW-2400PS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, VLAN, Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, port trunk, QoS, bandwidth control, and MAC address / TCP & UDP filter. The FNSW-2400PS provides Port-Based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allowed on the FNSW-2400PS will be maximally up to 24 for port based or up to 32 for IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group. Via supporting port trunking, the FNSW-2400PS allows the operation of a high-speed trunk combining multiple ports. The FNSW-2400PS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk group.
Department / Workgroup PoE Switch
With 24 10/100Mbps ports, the FNSW-2400PS provides a cost-effective and high-performance solution for power users. With its 4.8 Gigabits per second, non-blocking switch fabric, this device can easily provide a local, high bandwidth Fast Ethernet network for your departmental backbone. Providing up to 125Watts PoE budget, in-line power interface, the FNSW-2400PS helps the administrator to flexibly build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 24 cameras or wireless APs can be installed around the corner in the company for surveillance or wireless roaming demands. Without the power-socket limitation, the FNSW-2400PS makes the installation of cameras and Wireless LAN AP more efficiently.
 |
|
| Especificaciones |
|
HARDWARE SPECIFICATION
Ports24 10/100Base-TX RJ-45 Auto-MDI/MDI-X interfaces
Switch Processing Scheme Store-and-Forward
Throughput (packet per second) 3.57Mpps@64Bytes
Switch Fabric 4.8Gbps
Address Table 8K entries
Share Data Buffer 1.75Mb embedded memory for packet buffers
Flow Control
Back pressure for half duplex
IEEE 802.3x Pause Frame for full duplex
Dimension (W x D x H) 445 x 207 x 45 mm (1U height)
Weight 2.55kg
Power Requirement 100~240 VAC, 2A, 50-60 Hz
Power Consumption / Dissipation Max.135 Watts / 460 BTU
SMART FUNCTION
System Configuration Web interface, SNMP v1
Port Configuration
Port Speed Duplex mode selection
Port Disable / Enable
Bandwidth Control Yes
Broadcast Storm Control Yes
Port Statistics Display each port’s detail Ethernet traffic counter information
VLAN 24 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
Spanning Tree Protocol
STP, IEEE 802.1D (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
Link Aggregation
- 2 groups of 4-Port 10/100Base-TX trunk support, up to 800Mbps bandwidth per trunk
- 1 group of 2-Port 10/100/1000Mbps trunk support, up to 2000Mbps bandwidth per trunk
Port Trunking
2 groups of 4-Port 10/ 100Base-TX trunk support, up to 800Mbps bandwidth per trunk group
Port Mirroring Port mirroring allows monitoring of the traffic across any port in real time
QoS
Allows to assign low / high priority on each port
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
MAC Address / TCP & UDP Filter Yes
IGMP Snooping v1 / v2 Allows to disable or enable
POWER OVER ETHERNET
PoE Standard IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type Mid-Span
PoE Power output Per Port 48V DC, 350mA . Max. 15.4Watts
Power Pin Assignment 4/5(-), 7/8(+)
PoE Power Budget 125Watts
ENVIRONMENT
Temperature
Operating: 0~50 Degree C
Storage: -10~70 Degree C
Humidity
Operating: 5~95%
Storage: 5~95% (Non-condensing)
STANDARD CONFORMANCE
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3af Power over Ethernet (15.4Watts)
IEEE 802.3x Full-Duplex flow control
IEEE 802.1Q VLAN
IEEE 802.1p QoS
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol |
|
|
| |
|
|
|
