|
|
 Planet Technology FST-802S35 |
|
|
 |
 |
| Hardware > Redes >
Fibra-Optica > Conversor-de-medios-10-100 > Planet-Technology >
FST-802S35
|
|
| 10/100Base-TX to 100Base-FX (SC, SM) Smart Media Converter-35km |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
For the feature of plug and play and powerful smart function, PLANET releases a new 10/100Base-TX to 100Base-FX Smart Media Converter FST-80x series.
The FST-80x series Smart Media Converter provide Media conversion between 10/100Base-TX and 100Base-FX interfaces, such as multi-mode ST/SC connectors (2km), single-mode SC connector (15/35/50km) and single fiber connector (WDM, 20km) These connection options are able to for various applications.
The FST-80x series Smart Media Converter provide auto MDI/MDI-X on their TP ports and store-and-forward mechanism for eliminating faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as the half / full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interface. The LLR function can also immediately alarm network administrators for the media link issue and provide efficient solutions to monitor the entire network.
The FST-80x series Smart Media Converter can allow two types of segments connecting easily with efficient and cost effective. These Smart Media converter can be use as a standalone when its power on by its DC adapter. Or use as a slide-in module to the PLANET new 19-inch Web Smart 16-Slots Media converter chassis (MC-1610MR/MC-1610MR48). With this Web Smart Media converter chassis, the FST-801 are able to manage and status monitor through the local RS-232 console and remote web interface.
Standalone and Centralized Management Media Converter Installation
Affording the current network grows and expanding, the PLANET FST-80x provide advanced Media conversion technology to fill this kind of demand. The FST-80x provide the diverse fiber connecting types of options to meet different network applications. It is very flexible for FST-80x to work as a standalone device or install into the central Web Smart Media converter chassis for centralized management. While installing the FST-80x into the Web Smart Media Converter chassis , it supports hot swappable to avoid network down time, the FST-80x is ideal solution for building a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) and FTTB (Fiber to the Building) for ISPs, campuses and enterprises.
 |
|
| Especificaciones |
|
HARDWARE SPECIFICATION
Standards
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX and 100Base-FX
Copper Port
1 x 10/100Base-TX port, Auto-negotiation,
Auto-MDI-MDI-X
Optical Port 1 x 100Base-FX
Fiber Connector
FST-801 : ST / Multi-mode / 2km
FST-802 : SC / Multi-mode / 2km
FST-802S15 : SC / Single Mode / 15km
FST-802S35 : SC / Single Mode / 35km
FST-802S50 : SC / Single Mode / 50km
FST-806A20: WDM SC / Single Mode / 20km
FST-806B20: WDM SC / Single Mode / 20km
Optical Wavelength
FST-801: 1310nm
FST-802: 1310nm
FST-802S15: 1310nm
FST-802S35: 1310nm
FST-802S50: 1310nm
FST-806A20: TX: 1310nm, RX: 1550nm
FST-806B20: TX: 1550nm, RX: 1310nm
Launch Power (dBm) Max.
FST-801: -14
FST-802: -14
FST-802S15:0
FST-802S35:-8
FST-802S50:0
FST-806A20:-8
FST-806B20:-8
Launch Power (dBm) Min.
FST-801: -20 (62.5/125µm), -23.5 (50/125µm)
FST-802: -20 (62.5/125µm), -23.5 (50/125µm)
FST-802S15: −20
FST-802S35: -15
FST-802S50:-5
FST-806A20:-14
FST-806B20:-14
Receive Sensitivity (dBm)
FST-801: -31.8
FST-802: -31.8
FST-802S15: -32
FST-802S35:-34
FST-802S50: -35
FST-806A20:-31
FST-806B20:-31
Maximum Input power (dBm)
FST-801: -14
FST-802: -14
FST-802S15:0
FST-802S35:0
FST-802S50:0
FST-806A20:0
FST-806B20:0
Speed
Ethernet: 10/20Mbps for Half / Full-duplex
Fast Ethernet: 100/200Mbps for Half / Full-duplex
Maximum Forward Packet Size 1600Bytes
DIP Switch
DIP-1: Fiber Full / Half duplex modes select
DIP-2: Copper Forced Mode / Auto-negotiation Mode
DIP-3: Copper Speed 10Mbps / 100Mbps
DIP-4: Copper Full / Half duplex modes select
DIP-5: Fiber LLR (Link Loss Return) Enable / Disable
DIP-6: Fiber LLCF(Link Loss Carry Forward) Enable / Disable
LED Indicator
System: PWR
TP: LNK/ ACT, FDX/ COL, 100
FX: LNK/ ACT, FDX/ COL
Power Input DC 5V, 2A
Power Consumption 6.2 Watts/ 21 BTU (maximum)
Dimension (W x D x H) 94 x 81 x 26 mm
Weight 0.22kg
Cable
10Base-T: 2-pair Cat. 3, 4, 5 UTP cable, up to 100 meters
100Base-TX: 2-pair Cat. 5 UTP cable, up to 100 meters
100Base-FX:
-50/ 125μgm or 62.5/ 125μgm multi-mode fiber cable, up to 2km.
- 9/ 125μgm single-mode cable, provides long distance for 15/ 20/ 35/ 50km
Operate Environment 0~50 Degree C, 5~90% RH
Storage Environment -10~70 Degree C, 5~90% RH
Emission FCC Class B, CE mark |
|
|
| |
|
|
|
