|
|
 Planet Technology FT-905A |
|
|
 |
 |
| Hardware > Redes >
Fibra-Optica > Conversor-de-medios-10-100 > Planet-Technology >
FT-905A
|
|
| 10/100Base-TX to 100Base-FX (SFP) Web Smart Media Converter -up to 60km |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
The Web-Smart FT-90X Series Media Converters support conversion between 10/100Base-TX and 100Base-FX network. There are SC/SFP/WDM connectors and single-mode/multi-mode media for your needs. Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively. This converter can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis (MC-700, MC-1500 and MC-1500R / MC-1500R48).
Each Web-Smart converter is able to manage through the Web Interface. The powerful Web-Smart Media Converter supports flow control, QoS, bandwidth control and Ingress/Egress rate control, etc. The statistics functions of the Web-Smart converter helps administrators to remote analyses and count the packet flow of the current Ethernet link. Management function helps reduce the amount of valuable time that a network administrator spends detecting and locating network problems, otherwise it requires visual inspection of cabling and equipment.
The Web-Smart function also includes the LLR and Loop Back Test. LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. It provides more flexible settings for converters.
Fiber-optic Networking for ISP, enterprise, and home
With high performance of data transmission and easy installation, the FT-90x Series can build an ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building) for small office network environment from enterprises. The Web Management helps network administrators to monitor and setup the converter, speed and duplex through Web browsers.
 |
|
| Especificaciones |
|
HARDWARE SPECIFICATION
Standards
IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX, 100Base-FX
IEEE 802.3x, Flow Control
IEEE 802.1p, Class of Service
Copper Port
1 x 10/100Base-TX RJ-45 port
Auto-negotiation, Auto-MDI/MDI-x
Optical Port 1 x 100Base-FX
Fiber Connector
FT-902 : SC / Multi-mode / 2km
FT-902S15 : SC / Single Mode / 15km
FT-902S35 : SC / Single Mode / 35km
FT-902S50 : SC / Single Mode / 50km
FT-905A : SFP / Vary on transceiver module
FT-906A20: WDM SC / Single Mode / 20km
FT-906B20: WDM SC / Single Mode / 20km
Optic Wavelength
FT-902: 1310nm
FT-902S15: 1310nm
FT-902S35: 1310nm
FT-902S50: 1310nm
FT-905A: Vary on transceiver module
FT-906A20: TX: 1310nm, RX: 1550nm
FT-906B20: TX: 1550nm, RX: 1310nm
Launch Power (dBm) Max.
FT-902: -14
FT-902S15:0
FT-902S35:-8
FT-902S50:0
FT-905A:NA
FT-906A20:-8
FT-906B20:-8
Launch Power (dBm) Min.
FT-902: -20 (62.5/125µm), -23.5 (50/125µm)
FT-902S15: −20
FT-902S35: -15
FT-902S50:-5
FT-905A:NA
FT-906A20:-14
FT-906B20:-14
Receive Sensitivity (dBm)
FT-902: -31.8
FT-902S15: -32
FT-902S35:-34
FT-902S50: -35
FT-905A:NA
FT-906A20:-31
FT-906B20:-31
Maximum Input power (dBm)
FT-902: -14
FT-902S15:0
FT-902S35:0
FT-902S50:0
FT-905A: NA
FT-906A20:0
FT-906B20:0
Speed-Twisted-pair
10/20Mbps for Half/Full-Duplex
100/200Mbps for Half/Full-Duplex
Speed-Fiber-optic 200Mbps for Full-Duplex
Cable-Twisted-pair
10Base-T: 2-pair UTP Cat. 3, 4, 5, up to 100 m
100Base-TX: 2-pair UTP Cat. 5, up to 100 m
Cable-Fiber-optic cable
• 50/125µm or 62.5/125µm multi-mode fiber cable, up to 2km.
• 9/125µm single-mode cable, provides long distance for
15/20/35/50km or longer (very on SFP module)
LED Indicators
PWR,
TP LINK/ACT, TP FDX, TP SPEED
Fiber LINK/ACT, Fiber FDX
Power Consumption 5.5 Watts (maximum)
Power Input 5V/2A
Dimension (W x D x H) 93 x 69 x 25 mm
Operator Environment
Operating temperature: 0 to 50 degree C
Humidity: 10~90% non-condensing
Storage Environment
storage temperature: -25 to 70 degree C
Humidity: 10~90% non-condensing
Emission FCC Class A, CE Class B |
|
|
| |
|
|
|
