|
|
 Planet Technology IAP-2000PE |
|
|
 |
 |
| Hardware > Redes >
Wireless > Puntos-de-Acceso-Interior > Planet-Technology >
IAP-2000PE
|
|
| Industrial 802.11n Wireless Access Point |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
Industrial Wireless LAN
For robust Wireless access, the PLANET IAP-2000PE Industrial Access Point brings users a new choice. The IAP-2000PE is specially designed for the Wi-Fi application over a TCP/IP network in the harden environment. The IAP-2000PE comes with 802.11n Wireless interface for up to 300Mbps wireless performance and provides 4 x 10/100Mbps copper ports with 1-Port IEEE 802.3af PoE PD(Powered Device) inject interface delivered in an IP30 rugged strong case. The IAP-2000PE is rated to operate at the temperature from -10 to 60 Degree C. The IAP-2000PE is the ideal solution to wireless transmission in any harsh industrial environment.
IPv6 / IPv4 Web and SNMP Management
The IAP-2000PE supports both IPv6 and IPv4 web management functions. Its SNMP feature allows the system administrator to remote monitor and control the network devices more efficiently. With the easy and friendly management interface and plenty of management functions included, the IAP-2000PE is the best choice for system Integrators to build the large wireless service and for SMB to connect with the IPv6 network.
Steady and Wide Range Wireless Network Communication
The IAP-2000PE features 802.11n radio with 2T2R antenna technology compliant with 802.11b/g/n standards. It is equipped with two external 5dBi High-Gain antennas providing strong signal and excellent performance even in the long range or bad environment. With detachable RP-SMA connector design in the IAP-2000PE, it allows users to manually exchange higher gain antenna for further wireless coverage range.
Multiple Operating Modes
The IAP-2000PE supports multiple wireless communication connectivity: Wireless AP, Wireless Repeater, WDS Point-to-Point (PtP) and Point-to-Multipoint (PtMP), allowing various applications that give users more comprehensive experience. It also helps users to easily build wireless network and extend the wireless range of existed wireless network.
Wide Range of Wireless Security Support
To secure the wireless communication, the IAP-2000PE supports up-to-date encryption, WPA-PSK / WPA2-PSK with TKIP/AES encryption. In order to simplify the security settings, the IAP-2000PE supports Wi-Fi Protected Setup (WPS) configuration with PBC/PIN type, by just clicking the options and the secure connection between AP and wireless client will be built immediately.
Easy Installation and Wide Range of Power Usage
The IAP-2000PE is packaged in a strong IP 30 case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operations. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
Flexible Deployment with PoE Feature
Compliant with IEEE 802.3af Power over Ethernet standard, the IAP-2000PE can be powered and networked by a single UTP cable. It thus reduces the needs of extra cables and dedicated electrical outlets on the wall, ceiling or any other places where are difficult to reach. The wireless AP deployment becomes more flexible and worries free from the power outlet locations. |
|
| Especificaciones |
|
HARDWARE SPECIFICATION
10/100Base-TX Ports
4 x 10/100Base-TX Auto-Negotiation
Auto MDI / MDI-X
IEEE 802.3af PoE Ports 1 x PD (Port-1)
Antenna
2 x Detachable RP-SMA Connector
2 x 5dBi SMA Omni-directional antenna included in the package
Enclosure IP 30 Metal Case
LED Indicators P1, P2, PWR, FAL, WPS, WLAN, SEC, LAN1~4, PoE
Button
WPS Button
Reset Button
Dimension (W x D x H) 87.8 x 135 x 56 mm
Weight 871g
Power Requirement DC 12-48V / AC 24V
Installation DIN Rail Kit and Wall Mount Ear
WIRELESS INTERFACE SPECIFICATION
Standard Compliance with IEEE 802.11b/g/n
Frequency Band 2.4 to 2.4835GHz (Industrial Scientific Medical Band)
Modulation Type
DSS with DBPSK, DQPSK, QPSK and CCK
OFDM with BPSK, QPSK, 16-QAM and 64-QAM
Wireless Data Rate
IEEE 802.11b: 1/ 2/ 5.5/ 11Mbps
IEEE 802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps
IEEE 802.11n: 14/ 29/ 43/ 58/ 87/ 116/ 130/ 144Mps in 20MHz
30/ 60/ 90/ 120/ 180/ 240/ 270/ 300Mbps in 40MHz
Opt. Channel
America / FCC: 2.414~2.462GHz (11 Channels)
Europe / ETSI: 2.412~2.472GHz (13 Channels)
Japan / TELEC: 2.412~2.484GHz (14 Channels)
RF Output Power
802.11b: 18 dBm
802.11g: 15 dBm
802.11n: 15 dBm
Receiver Sensitivity
802.11b CCK 1.0Mbps: -94dbm
802.11b CCK 11.0Mbps: -91dbm
802.11g OFDM 6Mbps: -92dbm
802.11g OFDM 54Mbps: -76dbm
802.11n 20MHz MCS7: -72dbm
802.11n 40MHz MCS7: -70dbm
WIRELESS MANAGEMENT FEATURES
Wireless Mode Access Point
Channel Width 20MHz / 40MHz
Data Encryption Security
64 bit / 128 bit WEP
WPA / WPA2
WPA-PSK / WPA2-PSK
802.1x Network Access Control
Management Web-Based Configuration
Wireless Isolation Yes
PROTOCOL
Protocol / Feature
Bridge mode
IPv6
WDS and WPS
Static Routing and RIPv1/2
DMZ and Virtual Server
802.1D
802.1Q VLAN
QoS
SNTP
WMM
DHCP Server / Client
IGMP Proxy and DNS Proxy
UPnP and DDNS
SNMP
Management Web-Based configuration
STANDARDS CONFORMANCE
Standards Compliance
IEEE 802.11b/g and 802.11n Wireless LAN
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.1Q VLAN
ENVIRONMENT SPECIFICATION
Temperature / Humidity
Operating: -10~60 Degree C, 5~ 90% (non-condensing),
Storage: -20~70 Degree C, 0~95% (non-condensing)
Emission FCC, CE
Stability Testing
IEC60068-2-32 (Free Fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration) |
|
|
| |
|
|
|
