|
|
 Planet Technology IGS-8044MT |
|
|
 |
 |
| Hardware > Redes >
Cobre > Switches-Industriales > Planet-Technology >
IGS-8044MT
|
|
| 4-Port 10/100/1000Mbps + 4-Port Gigabit TP/SFP Combo Managed Industrial Switch with Wide Operating Temperature |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
Full Gigabit Performance for Industrial Network
PLANET IGS-8044MT is a Layer 2 fully Gigabit Managed Industrial switch that equipped with 4 10/100/1000Mbps Ethernet ports and 4 100/1000Mbps TP/SFP combo interfaces. The 4-Port 100/1000Mbps combo Fiber interface delivers data in high speed transmission, and complies with both Gigabit and Fast Ethernet fiber devices. The IGS-8044MT is also an industrially (substation) hardened managed Ethernet Switch specifically designed with a rugged high-strength protection case, and to operate reliably in electrically harsh, and climatically demanding -40 to 75 Degree C wide temperature environments. The IGS-8044MT is the most reliable choice for highly-managed, and Fiber Ethernet application by offering the powerful features:
■ Redundant Ethernet Network
■ Manageable
■ Power Redundant
■ Fully Gigabit throughput capability
■ Dual Speed Fiber interfaces support
■ -40 to 75 Degree C wide operation temperature
■ 12V to 48V DC wide range power supported
■ IP30 metal case
Redundant Ring, Fast Recovery to a Redundant Ethernet Network
The IGS-8044MT supports multiple redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in the harsh factory environments. The IGS-8044MT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 20ms to quickly bring the network back to normal operation.
Environmentally Hardened Design
With IP30 aluminum industrial case protection, the IGS-8044MT possesses a high level of immunity against electromagnetic interference, and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. The IGS-8044MT features wide operating temperature range from -40 to 75 Degree C and allows itself to be placed in almost any difficult environment.
Robust Layer 2 Features and Advanced Security
The IGS-8044MT supports robust advanced features including IEEE 802.1Q VLAN, GVRP, Port link aggregation, QoS, broadcast storm control, MAC address filtering, IGMP snooping enhanced security and bandwidth utilization to fit a variety of network applications. The IGS-8044MT allows the operation of high-speed trunk combining multiple ports. Maximum up to 4 ports of the IGS-8044MT can be assigned for 4 trunk groups and support fail-over as well. Additionally, its standard-compliant implementation ensures interoperability with equipments from other vendors.
Easy Installation and Dual-Redundant Power Supply
The IGS-8044MT is packaged in a compact case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. In addition, the IGS-8044MT offers dual-redundant, reversible polarity 12~48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
Harden Environment Core Switch Application
The IGS-8044MT Managed Industrial Ethernet Switch offers full port Gigabit speed. It is not only a core switch but also provides very high reliability and security features to make sure the continuous operation in harsh environments such as control cabinet of transportation, factory, outdoor and places where are in extreme low or high temperatures. Moreover, the IGS-8044MT is also compatible with 100Mbps and 1000Mbps SFP transceiver to provide strongly stable long distance connection and flexible industrial networking deployment.
Factory Redundant Ring Application
By applying the IGS-8044MT Managed Industrial Switch, it offers multiple redundant ring modes to prevent network interruption due to power or connection failure. Therefore, the Industrial network would operate stably and safe from the advantages of high reliability and fast recovery capability providing by the IGS-8044MT.
Coupling Ring – Connection redundant with different area applications
 |
|
| Especificaciones |
|
HARDWARE SPECIFICATION
Copper Ports 8 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 4 100/1000Base-X shared SFP interfaces
Switch Processing Scheme Store-and-Forward
Switch Fabric 16Gbps / non-blocking
Throughput (packet per second) 11.9Mpps
Address Table 8K entries, automatic source address learning and ageing
Share data Buffer 1Mbits
Maximum Frame Size 1522 Bytes packet
Console Interface One RJ-45 to RS-232 male connector for switch management
Flow Control
IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex
Reset Button
< 5 seconds: System reboot
> 10 seconds: Factory Default
Dimension (W x D x H) 74.3 x 109.2 x 153 mm
Weight 1.15Kg
LED
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Orange)
4-Port 10/100/1000T: Link/Activity (Green), 10/100TX Full duplex/Collision (Orange)
SFP port: LNK/ACT (Green)
1000T: LNK/ACT (Green), 1000M( Green)
Power Requirement 12V to 48V DC input
LAYER 2 FUNCTION
Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c
Port configuration
Port disable / enable
Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Bandwidth control on each port
Port Status
Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status
Port Mirroring
TX / RX / Both
VLAN
Port-Based VLAN, up to 8 VLAN groups
IEEE 802.1q Tagged Based VLAN, 4K VLAN ID, up to 256 VLAN groups
Spanning Tree IEEE 802.1w Rapid Spanning Tree
Link Aggregation
IEEE 802.3ad LACP / Static Trunk
4 groups of 4-Port trunk support
QoS
Traffic classification based on :
•Port Number
•802.1Q Tag
•802.1p priority
•IP DSCP / TOS field in IP Packet
IGMP Snooping
V2 and v3
1024 multicast groups and IGMP query
Access Control List
IP-Based ACL / MAC-Based ACL
Up to 256 entries
Bandwidth Control
Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
Security
Supports 100 entries of MAC address for static MAC and another 100 for MAC filter
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder
SNMP MIBs
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-1493 Bridge MIB
RFC-2674 Extended Bridge MIB (Q-Bridge)
Private MIB
STANDARDS CONFORMANCE
Regulation Compliance FCC Part 15 Class A, CE
Safety EN60950-1
Standards Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100ase-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
ENVIRONMENT
Operating
Temperature: -40 ~ 75 degree C
Relative Humidity: 5 ~ 95 % (non-condensing)
Storage
Temperature: -40 ~ 85 degree C
Relative Humidity: 5 ~ 95 % (non-condensing) |
|
|
| |
|
|
|
