|
Planet Technology SGSW-24040R |
|
|
|
|
Hardware > Redes >
Cobre > Switches-Gestionables > Planet-Technology >
SGSW-24040R
|
|
24-Port 10/100/1000Mbps with 4 Shared SFP Managed Stackable Switch / -48V DC Redundant Power |
|
|
|
|
|
|
|
Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
Hoja de Datos |
|
Disponibilidad: |
|
| |
|
Características |
|
High-Density, Resilient Deployment Switch Solution for Growing Gigabit Networking of Enterprise, Campus and Data Center
For the growing Gigabit network demand, PLANET provides new generation Stackable Gigabit Switch solution, SGSW-24040 series Switch to fulfill the need of large scale of network deployment in the enterprises, Telecoms or campus. The PLANET SGSW-24040 series Switch, the SGSW-24040 and the SGSW-24040R, is the Layer 2 Managed Stackable Gigabit Switch which provides 24 10/100/1000Mbps Gigabit Ethernet ports, 4 shared Gigabit SFP slots, and 2 dedicated High-Speed HDMI-like interfaces for stacking with the series of switches. Up to 16 units, 384 Gigabit Ethernet ports can be managed by a stacking group and you can add ports and functionality as needed. The 2 built-in stacking ports providing 5Gbps bandwidth and up to 20Gbps Bi-directional speed, it can handle extremely large amounts of data in a secure topology linking for backbone or high capacity network server with 68Gbps switching fabric per unit. The stacking technology also enables the chassis-based switches to be integrated into SGSW-24040 series Managed Switch but without the expensive up-front cost.
Cost-effective IPv6 Managed Gigabit Switch Solution for SMB
The SGSW-24040 series supports both IPv4 and IPv6 management functions. They can work with original IPv4 network structure and further support the new IPv6 network structure in the future. With easy and friendly management interfaces and plenty of management functions included, the SGSW-24040 series is the best choice for ISP to build the IPv6 FTTx edge service and for SMB to connect with the IPv6 network.
High Reliability Stacking Management
The SGSW-24040 series applies the advantage of stackable technology to manage the stack group with one single IP address, which helps network managers to easily manage a stack of switches instead of connecting and setting each unit one by one. Through its high bandwidth tunnel and stacking technology, the SGSW-24040 series gives the enterprises, service providers and Telecoms flexible control over port density, uplinks and switch stack performance. Stack redundancy of the SGSW-24040 series ensures data integrity be retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
Robust Layer 2 Features
The SGSW-24040 series can be programmed for advanced switch management functions such as dynamic Port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP Snooping. The SGSW-24040 series provides 802.1Q Tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the SGSW-24040 series allows the operation of a high-speed trunk combining multiple ports. It enables maximum up to 12 groups of 16 ports for port link aggregation, and supports fail-over as well.
Easy and Friendly Traffic Control
PLANET SGSW-24040 series is loaded with powerful but easy traffic management and QoS features to enhance services offered by telecoms. The functionality includes QoS features such as wire-speed Layer 4 traffic classifiers and bandwidth limiting that are particular useful for multi-tenant unit, multi business unit, Telco, or Network Service Provide applications, such as VoIP, video streaming and multicast applications. The embedded handy QoS configuration wizard helps you set up a typical network application rules easily and quickly via Web interface. The SGSW-24040 series also empowers the enterprises or campus to take full advantages of the limited network resources and guarantees the best performance in Voice and Video conferencing transmission.
Efficient and Secure Management
For efficient management, the SGSW-24040 series Managed Ethernet Switch is equipped with console, WEB and SNMP management interfaces. With the built-in Web-Based management interface, the SGSW-24040 series offers an easy-to-use, platform-independent management and configuration facility. The SGSW-24040 series supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the SGSW-24040 series can be accessed via Telnet and the console port. Moreover, the SGSW-24040 series offers secure remote management by supporting SSH ,SSL and SNMPv3 connection which encrypt the packet content at each session.
Enhanced Security
The SGSW-24040 series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises of 802.1x Port-Based and MAC-Based user and device authentication. With the private VLAN function, communications between edge ports can be protected to ensure user privacy. New SGSW-24040 series net Security also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.
Flexibility and Extension Solution
The two mini-GBIC slots built in the SGSW-24040 series support Dual-Speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, that means, the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required. The distance can be extended from 550 meters (Multi-Mode fiber) up to above 10/50/70/120 kilometers (Single-Mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
AC / DC Power Redundant to Ensure Continuous Operation ( SGSW-24040R )
Particularly for the SGSW-24040R, it is equipped with one 100~240V AC power supply unit and one DC -48V power supply unit to provide an enhanced reliable and scalable redundant power supply installation. The continuous power system is specifically designed to fulfill the demands of high tech facilities requiring the highest power integrity. The -48V DC power supply implemented makes SGSW-24040R the telecom level device that can be located at the electronic room.
Carrier Class backbone Switch for the Campus and Community
For small area network communication such as in campus and community, the PLANET SGSW-20404 series Managed Stackable switches enable an affordable and scalable network deployment. Multiple SGSW-24040 series switches may be connected together to constitute a chain or ring stack topology using the 5Gbps stacking ports as interconnect links. Up to 16 units, 384 high-density Gigabit Ethernet ports can be managed by a stacking group with a single IP address. Furthermore, up to 64 mini-GBIC/SFP ports are available for remote uplink connectivity in a stacking group and provide the uplink to the edge network through Gigabit Ethernet LX/SX SFP modules. The SGSW-24040 series stackable switching system gives you the flexibility to expand small area network when needed.
High Performance, High-Density, High Reliable Enterprise Backbone and Server Farm Switch
Gigabit Ethernet supported equipment had become the fundamental unit of Enterprises and Network servers. The SGSW-24040 series stackable Gigabit switch can easily provide the cost-effective, high-density and high-bandwidth required from now on. Dedicated stacking features built into SGSW-24040 series switch makes all devices in the stack operate together as a one much larger switch providing multiple high performance Gigabit Ethernet network for backbone of enterprise or Telecoms. The SGSW-24040 series switch is ideal to be used as a server farm switch connecting servers. With the dynamic link aggregation function, a 16 GB fat pipe is provided for connecting to the backbone if required.
The dual power supplies provide the SGSW-24040R the non-Stop network service ability. Besides the AC power input, the DC power supply can be chosen as -48V DC power input source or redundant power for SGSW-24040R. The SGSW-24040R can take electrical power either from the AC outlet, the DC outlet or both for redundant.
Department / Edge Security and QoS Switch
The SGSW-24040 series switch delivers high-performance and cost-effective Gigabit Ethernet network connectivity for the increasing number of IP telephones, IP Surveillances, wireless access points and other devices at the edge of the network. The SGSW-24040 improves the network efficiency and protects the network clients with the powerful features:
■ Layer 2 to Layer 4 security
■ QoS
■ 802.1x Port-Based and MAC-Based network access authentication security
■ Multicast IGMP Snooping
FTTX / MAN application Switch
The SGSW-24040 series applies the double tag VLAN (Q-in-Q) technology to provide low cost and easy operation for service providers carrying traffic for multiple customers across their networks. With SNMPv3 and RMON groups support, the SNMPv3 security structure in the SGSW-24040 consists of various security models, with each model having its own security levels for the ISP and Service Provider |
|
Especificaciones |
|
HARDWARE SPECIFICATION
Copper Ports 24 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
4 1000Base-SX/LX/BX SFP interfaces, shared with Port-21 to Port-24
100Base-FX SFP transceiver compatible
Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 68Gbps / non-blocking
Address Table 8K entries
Share Data Buffer 1392 kilobytes
Maximum Frame Size 10K Bytes
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED
System: Power, Master
Ports: 10/100/1000 Link/Act, SFP Link, Stack
Reset Button
< 5 secs: System reboot
> 5 secs: Factory Default
Dimension (W x D x H) 440 x 300 x 44.5 mm, 1U height
Weight 3.0Kg
Power Input
• 100~240V AC, 50/60Hz
• -48V DC @ 0.6A, Range: -30 ~ -60V
Power Consumption Max. 30 watts / 102 BTU
ESD Protection 6KV DC
STACKING
Stacking Ports Two 5Gbps HDMI-Like interface
Stacking Numbers 16
Stacking Bandwidth 10Gbps (Full-Duplex)
Stack ID Display 7-Segment LED Display (1~9, A~F,0)
Stack Topology Ring / Chain / Back-to-Back stack
LAYER 2 FUNCTION
Management Interface Console, Telnet, Web Browser, SNMPv1, v2c
Secure Management Interface SSH, SSL, SNMP v3
Port Configuration
Port disable/enable
Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Bandwidth control on each port
VLAN
802.1Q Tagged Based VLAN
Port-Based VLAN
Q-in-Q
Private VLAN Edge (PVE)
Up to 256 VLAN groups, out of 4094 VLAN IDs
Spanning Tree Protocol
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree
Up to 8 MST instances
Link Aggregation
IEEE 802.3ad LACP / Static Trunk
Supports 12 groups of 16-Port trunk support
QoS
Traffic classification based, Strict priority and WRR
4-Level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
DSCP/TOS field in IP Packet Policy-Based QoS
IGMP Snooping
IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
IGMP Querier mode support
Access Control List
IP-Based ACL / MAC-Based ACL
Up to 256 entries
SNMP MIBs
RFC-1213 MIB-II
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2819 RMON MIB
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-2933 IGMP-STD-MIB
RFC3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
STANDARDS CONFORMANCE
Standards Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
Regulation Compliance FCC Part 15 Class A, CE
ENVIRONMENT
Operating
Temperature: 0 ~ 50 Degree C
Relative Humidity: 20 ~ 95% (non-condensing)
Storage
Temperature: -40 ~ 70 Degree C
Relative Humidity: 20 ~ 95% (non-condensing)
ACCESORIES
CB-STX200 2 Meter 5Gbps Stacking Cable with Crossed-HDMI connector
CB-STX50 0.5 Meter 5Gbps Stacking Cable with Crossed-HDMI connector |
|
|
|
|
|
|