|
|
 Promise FasTrak TX4310 |
|
|
 |
 |
| Hardware > Integracion >
Controladoras-(HBA) > S-ATA-(Controladora) > Promise >
FasTrak TX4310
|
|
| Controladora 4 puertos SATA 3 GB/s por puerto, PCI-X x 8 host interface |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
Cost-effective SATA RAID 0/1/5/10 PCI Adapter
As the next generation of the FastTrak TX4300, the Promise FastTrak TX4310 4-port SATA RAID PCI adapter continues to offer a low-cost solution for implementing a RAID 0, RAID 1, RAID 10 and now RAID 5 storage system with up to four high-performance Serial ATA disk drives. In addition, the FastTrak TX4310 comes with improved software feature sets such as WebPAM. Promise Technology is the leading provider of Serial ATA interface solutions, and with the FastTrak TX4310, users can benefit from Promise's experience in maximizing Serial ATA storage system performance.
Promise's Proven FastTrak RAID Engine
The FastTrak TX4310 leverages Promise's proven RAID 0/1/5/10 software engine for fast, efficient, and reliable RAID. Use RAID 0 for massive capacity and maximum performance, RAID 1 for data protection, RAID 5 for striped data with rotational parity and four-drive RAID 10 for data protection and performance enhancement. Promise's RAID engine also offers performance enhancing technology like elevator seek and load balancing for efficient performance. For maximum uptime, the FastTrak supports features like transparent data recovery and drive rebuilds performed in the background.
SATA 3Gb/s Support
The controller supports SATA 3Gb/s drives and conforms to Serial ATA II, Extensions to SATA 1.0a specification with Native Command Queuing and Disk Activity LED headers support. In addition to Native Command Queuing, the controller also supports Tagged Command Queuing with drives that can take advantage of this capability. Command Queuing increases I/O performance by intelligently reordering data requests so that the data can be more quickly accessed than if the commands weren't ordered.
Advanced HBA Features
The low-profile form factor FastTrak TX4310 PCI adapter incorporates many of Promise Technology's advanced host bus adapter features. The 66MHz PCI bus supports up to 266MB/sec burst data transfer rate. The FastTrak TX4310 also includes large LBA support for drives above 137GB, and its onboard BIOS automatically identifies and configures drive type. |
|
| Especificaciones |
|
Device Support
Storage capacity up to 4.0 terabytes (four 500GB drives x 2
controller system)
4 SATA 3Gb/s ports for up to 4 Serial ATA devices
Supported RAID Levels
RAID 0/1/5/10/JBOD
RAID 0 – Data striped across 2-4 drives for increased performance
RAID 1 – Mirrored pairs of drives for data protection
RAID 5 – Striped data + rotate parity
RAID 10 – Data mirrored then striped across 4 drives, ultimate data protection and performance (provides a level of double drive failure protection)
Data Transfer Rate
Up to 266 MB per second (Performance may vary depending upon drive make, motherboard and PCI bus speed)
RAID Features
Data handling optimizations include elevator seek and load balancing
Supports hot-swap of failed drives
Offers transparent data recovery and rebuilds drive in background
Online Capacity Expansion - add capacity on the fly
RAID Level Migration - change array levels on the fly
MetaData on Disk (MDD) for drive roaming
Easy to Use
Quick initialization
Arrays are bootable with built-in BIOS
Upgrades your current disk drive to a RAID array by migrating existing data to the array
System Management
Management Tools
WebPAM (Web-based Promise Array Management) local and remote monitoring for Windows and Linux:
–monitors status of arrays, hard drives, and controller via TCP/IP
–warns of drive failure
–allows rebuilds of mirrored arrays
–synchronizes data in fault-tolerant arrays
–email notification for array events
–S.M.A.R.T.-compatible status reporting
Notification
Email, audible, and visible alarms
Operating System Support
Microsoft Windows XP, Windows Server 2003, Windows 2000
RedHat Linux; SuSE Linux
Linux partial open source code
Hardware
Serial ATA 3G
Support Supports Serial ATA II: 3Gb/s Specification
Supports Serial ATA II: Extensions to Serial ATA 1.0a, including
–Native Command Queuing
–Staggered Drive Spin-Up
–HDD Activity Indication
Multiple Controllers Support Up to 2 controllers in the same system are supported
PCI Support
32-bit / 66MHz PCI interface compliant to PCI Rev 2.3
(Backward-compatible with PCI 33MHz)
HBA Features
Low-profile form factor (HW) 2.00 x 4.69 inches (51 x 119 mm)
BIOS flash upgradeable for future updates
Built in SMBus connector for Promise SuperSwap 4100/1100
Supports ACPI (S1, S3, S4)
Physical and Environmental
Operating temperature: 32 to 122°F (0 to 50°C)
Relative humidity: 5%-95% non-condensing
Built in SMBus connector for Promise SuperSwap 4100/1100
Cables in kit 4 x 25" (650mm) Serial ATA Cables
Agency Certifications UL, cUL, CE, FCC Class B, BSMI, MIC, C-Tick, VCCI |
|
|
| |
|
|
|
