|
|
 Promise FasTrak TX4660 |
|
|
 |
 |
| Hardware > Integracion >
Controladoras-(HBA) > S-ATA-(Controladora) > Promise >
FasTrak TX4660
|
|
| Four SAS/SATA ports, RAID 0/1/5/10/JBOD/SPAN, PCI-E |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
Complete RAID Features for SAS/SATA
The Promise FastTrak SAS/SATA RAID PCI Express adapter offers an economical solution and SPAN storage system with up to eight high-performance SAS or SATA disk drives. In addition to the supported RAID features, FastTrak TX4660/TX8660 also supports SAS(Non-RAID) mode for general storage application without
RAID.
Single Hardware & Software for RAID and Non-RAID
The FastTrak TX4660/TX8660 offers single hardware and software for both RAID and Non-RAID storage applications, one system integration and qualification effort plus rich operating system support for various storage applications in the field.
Enterprise Proven RAID Engine
The FastTrak TX4660/TX8660 model delivers fast, efficient, and reliable RAID levels 0/1/5/10/JBOD and SPAN using Promise’s enterprise proven technology.
The flexible FastTrak family allows you to choose the best fit for your application:
:: RAID 0 – Maximum capacity and performance without any fault tolerance
:: RAID 1 – Maximum data protection.
:: RAID 5 – Balance of capacity plus data protection
:: RAID 10 – Drive redundancy plus capacity and performance
:: JBOD – single, non-array drive
:: SPAN – concatenated stripe
For maximum uptime, the FastTrak line supports features like transparent data recovery and drive rebuilds performed in the background.
Supports Both SAS and SATA Drives
By supporting both SAS and SATA drive types and using the latest industry protocols to enhance performance and reliability, the FastTrak controllers provide a flexible costeffective RAID controller board spanning server, workstation and desktop markets
Advanced Features
The FastTrak PCI Express controller incorporates many of Promise Technology's advanced features. The onboard BIOS automatically identifies and configures drive type.
The Web-based Promise Array Management (WebPAM) software provides users easy installation, configuration and operation. Promise’s Metadata on Disk, simplifies disaster recovery efforts, by enabling migration to replacement hardware. |
|
| Especificaciones |
|
Device Support Four SAS/SATA ports for up to four SAS/SATA 3Gb/s devices
RAID Levels
RAID 0 – striping for performance
RAID 1 – disk mirroring
RAID 10 – striping across mirror sets
RAID 5 – striped data with rotational parity
JBOD – single, non-array drive
SPAN –concatenated stripe
Data Transfer Rate Up to 750 MB/s
Background Activity
RAID Features - Support hot-swap of failed drives
Transparent data recovery and rebuilds drive in background
Online Capacity Expansion - adds capacity on the fly
RAID Level Migration - changes array levels on the fly
MetaData on Disk (MDD) for drive roaming
Easy to Use
Fast initialization Arrays are bootable with built-in BIOS Upgrades your current disk drive to a RAID array by migrating existing data to the array
System Management
Management Tools
WebPAM (Web-based Promise Array Management) local and remote monitoring for Windows and Linux — monitors status of arrays, hard drives, and controller via TCP/IP, warns of drive failure, allows rebuilds of mirrored arrays, synchronizes data in
fault-tolerant arrays, email notification for array events, S.M.A.R.T.-compatible status reporting
Notification Email, audible, and visible alarms Not Support
Operating System Support
Microsoft Windows Vista, XP, 2000, Windows Server 2003/2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Linux
Linux kernel 2.6 partial source code
Supports x86 and x64 platforms
Hardware
SAS 3Gb/s Support
Supports Serial Attached SCSI 1.1, including
• SAS 3Gb/s
• SSP protocol
Serial ATA 3Gb/s Support
Supports Serial ATA Revision 2.6, including
• Native Command Queuing
• Staggered Drive Spin-Up
• HDD Activity Indication
PCI Express Support PCI Express x4 interface compliant to PCI Express Specification, Rev.1.0a
HBA Features
Low-profile form factor MD2
Flash up-gradable for future updates
Supports ACPI (S1, S3, S4)
Physical and Environmental
Dimension (H x W): 2.72 x 6.3 inches (69 x 159 mm)
Operating temperature: 32 to 122°F (0 to 50°C)
Relative humidity: 5%-95% non-condensing
Agency Certifications UL, cUL, CE, FCC Class B, BSMI, VCCI, KCC, C-Tick |
|
|
| |
|
|
|
