|
|
 Qlogic QLE2562 |
|
|
 |
 |
| Hardware > Integracion >
Controladoras-(HBA) > Fibre-Channel-HBA > Qlogic >
QLE2562
|
|
| Dual port 8Gb Fibre Channel-to-PCI Express adapter |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
QLE2562 Host Bus Adapter
The QLE2562 is a PCI Express, dual port, Fibre Channel adapter. The QLE2562 is part of the QLE2500 adapter product family that offers next generation 8Gb Fibre Channel technology, meeting the business requirements of the enterprise data center.
Virtualization Optimized
The QLE2562 delivers enhanced security, Quality of Service (QoS), and enables dynamic provisioning. The QLE2562 allows multiple logical (virtual) connections to share the same physical port. Each logical connection has its own resources and the ability to be managed independently.
Power Optimized
The QLE2562 takes advantage of QLogic StarPower technology, ensuring power efficiency. QLogic StarPower technology offers dynamic and adaptive power management features such as power and bandwidth optimized intelligent PCI Express link training, low-power switching power supplies, and thermally efficient layout requiring lower airflows.
RAS Optimized
The QLE2562 provides the highest data integrity by ensuring Overlapping Protection Domains (OPD) on both the control and data paths. The QLE2562 also utilizes Enhanced Hardware Assist Firmware Tracing (EHAFT), allowing more comprehensive debugging with standard drivers.
Security Optimized
The QLE2562 enables SAN-level authentication (FC-SP), fabric-level isolation (NPIV), and is capable of end-to-end data integrity (T10).
Management Optimized
The QLE2562 is backward compatible with 4Gb and 2Gb speeds. A single common driver per operating system for three generations of FC HBAs (8Gb, 4Gb, and 2Gb) simplifies deployment. QLogic’s unified driver model (firmware embedded in the driver) eliminates potential interoperability issues between firmware and driver versions. The QLE2562’s API compatibility with 4Gb products accelerates deployment while ensuring application compatibility.
Investment Protection
For over 15 years, QLogic has been a technological leader with products that address the current needs of customers, yet provide strong investment protection to support emerging technologies and standards. QLogic stands alone in the industry with its product portfolio depth and experience in successfully delivering technological solutions that address the needs of today and tomorrow
•Fibre Channel 8Gb to PCI Express x8
•3200 MBps (full-duplex)
•200,000 initiator and target IOPS per port
•StarPower™ technology
Benefits
•Virtualization optimized
•Power optimized
•Reliability, Availability, Serviceability (RAS) optimized
•Security optimized
•Management optimized |
|
| Especificaciones |
|
Fibre Channel Specifications
Negotiation
8/4/2Gbps auto-negotiation
IOPS
200,000 initiator and target IOPS per port
Class of service
Class 2 and 3
Topology
FC-AL, FC-AL2, point-to-point, switched fabric
Protocols
FCP-3-SCSI, FC-Tape (FCP-2)
PCI Express Interface
Compliance
•PCI Express Base Specification rev. 2.0
•PCI Express Card Electromechanical Specification rev. 2.0
•PCI Bus Power Management Interface Specification rev. 1.2
•PCI Hot Plug Specification rev. 1.0
Physical and electrical
•PCIe x8 physical connector
•StarPower link training
•Maximum x4 lanes for Gen2 rate
•Maximum x8 lanes for Gen1 rate
Connectivity
Ports
•Dual 8Gbps Fibre Channel
•SFP+ with LC-style connector
HBA Specificationse
Airflow
No airflow required
Power consumption
6.2 Watts (typical)
Form factor
Low-profile PCI Express card (6.6 in. x 2.54 in.)
Temperature
•0 to 55°C (operating)
•-40 to 70°C (non-operating)
Relative Humidity
•10% to 90% (operating, non-condensing)
•5% to 93% (non-operating, non-condensing)
RoHS compliance
RoHS 6
Tools and Utilities
Management tools
SANsurfer FC HBA Manager, SANsurfer FC HBA CLI
Device utilities
Utilities for flashing bootcode, Linux scripting tools
Boot support
BIOS, FCode, UEFI, EFI
APIs
SNIA HBA API V2, SMI-S, FDMI
Platform/Operating System Support
Hardware platforms
•IA32 (x86), IA64, Intel® 64
•AMD™ Opteron64
•Sun™ SPARC®
Operating systems
•Windows® Server™ 2003, Windows XP Pro x64, Windows Vista™ (Business and Enterprise), Windows Server 2008
•Solaris™ 10 (x86 and SPARC)
•Red Hat® AS 5.x, 4.x
•Novell® SLES 10, 9
•VMware® ESX Server 3.5 and 3i (targeted versions)
•NetWare® 6.5
Agency Approvals—EMI and EMC
US/Canada
FCC Part 15, Subpart B, Class A; ICES-003, Class A
Europe
EN55022, Class A
New Zealand/Australia
AS/NZS 3548 Class A
Japan
VCCI V-3/2004.4, Class A
Korea
MIC
Taiwan
BSMI (CNS 13438)
Agency Approvals—Safety
US/Canada
UL, cUL: UL60950, CSA C22.2 No.60950, Class 1 Laser Product per DHHS 21CFR J
Europe
73/23/ECC Low Voltage Directive: TUV: EN60950-1:2001, EN60825- 1:1994+A1+A2, EN60825-2:1994+A1
|
|
|
| |
|
|
|
