|
|
 Zyxel P-663H-51 |
|
|
 |
 |
| Hardware > Redes >
Cobre > Routers-ADSL > Zyxel >
P-663H-51
|
|
| ADSL2+ 4-port Bonding Gateway |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
Higher-speed Broadband Access
The P-663H-51 has two ADSL2/2+ WAN ports. With the ATM-based multi-paired bonding feature, the two ports can be grouped into a logical link boasting the bandwidth twice as fast as a single ADSL2/2+ port, and the bit rates of each individual port can be freely and independently changed by their respective PHY layer. If one of the member ports fails, the conveyed traffic will be moved to the other port. When the failed port recovers, it will seamlessly return to the logical link and share the transmission/reception of the upper-layer traffic.
Robust, State-of-the-Art IP Security
The P-663H-51 supports state-of-the-art Firewall features, Stateful Packet Inspection, anti-DoS (Denial of Service) and IP/MAC address spoofing protection for basic defense against hackers, network intruders and other hazardous threats.
Sophisticated QoS for Triple-Play Services
The P-663H-51 comes with complete ATM and Ethernet QoS mechanisms, as well as various IP QoS features (Packet classification/Rate Limitation/Queue Scheduling). The seamless QoS-mapping not only allows consistent and appropriate traffic treatment of packets, but also enables fulfillment of triple-play services. The IGMP proxy/snooping and fast leave (v1, v2) features also supports the IP multicasting service easily. |
|
| Especificaciones |
|
ADSL support
ADSL2/2+, Annex L and Annex M
Support DELT (dual ended loop test)
Rate adaptation (SRA)
"Dying Gasp" functionality support to notify the DSLAM that power has been turned off
ATM Support
8 PVCs Support
RFC 1483/2684 Multiple Protocol over AAL5
RFC 2364 PPP over AAL5
RFC 2516 PPP over Ethernet
VC and LLC Multiplexing
Traffic Shaping UBR, CBR, VBR-nrt
ATM Forum UNI 3.1/ 4.0 PVC
610 OAM remote F4/F5 loop-back, AIS, and RDI OAM cells
ATM-based Multi-Pair Bonding (G.998.1)
Ethernet Functions Default Bridging for user traffic
ARP
MAC count limiting
802.1Q Tag-Based VLAN
802.1P CoS with priority queuing
IP Management
IP routing : TCP, UDP, ICMP, ARP
VPN (IPSec, PPTP, L2TP) pass-through
DHCPserver (LAN port)
DHC Relay/Client (WAN port)
RADIUS client
DNS repaly/proxy
Dynamic DNS
RIP/RIP v2 routing functions
NAT/PAT/NAPT
IGMP Proxy/snooping and fast leave (v1, v2)
IP QoS
UPnP IGD 1.0
Security
Service access control based on incoming interface WAN or LAN
Service access control based on source IP address
Anti-Denial of Service, including SYNC flooding, IP Smurfing, Ping of Death, Fraggle, Teardrop, Land
No response for WAN port scanning
TCP/IP/port/Interface filtering rules
Protect against IP and MAC address spoofing
Stateful Packet Inspection
Configuration and Management
Web-based GUI
Command Line Interface (CLI)
Telnet Remote Management
TFTP FW upgrade and configuration backup/restore
SNMPv1/v2c
Hardware Specification
1 RJ-11 connector for 2 ADSL2+ ports.
4-Port RJ-45 connectors for 10/100Mbps with Auto MDI/MDIX.
Power switch.
reset button to return to the default setting
DC Power Jack. (12V, 1.5A).
LED
System LED
Alarm LED
4 Ethernet LAN LEDs
2 ADSL2+ LED
Physical Specifications
Dimensions : 207(W) x 161(D )x 52(H) mm
Weight: 400 g
Operating Environment
Temperature: 0°C ~ 40°C
Humidity: 20% ~ 85% ( non-condensing)
Power input and Power Consumption
12 VDC (1.5A)
12 watt (on board power consumption)
Certificate
RoHS & WEEE
Safety
UL1950
CSA C22.2 No. 950
EMC
FCC Part 15 & Part 68ClassB |
|
|
| |
|
|
|
