|
|
 Zyxel VMG1312-B |
|
|
 |
 |
| Hardware > Redes >
Cobre > Routers-VDSL > Zyxel >
VMG1312-B
|
|
| Wireless N VDSL2 4-port Gateway with USB (3G Backup) |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
VDSL2 High-speed Internet access
802.11n Wireless access
TR-069 remote management support
3G backup support
|
|
| Especificaciones |
|
VDSL Compliance
ITU-T G.993.1 VDSL1 compliant
ITU-T G.993.2 VDSL2, band plan 997, 998
Support VDSL profile: 8a/b/c/d, 12a/b, and 17a
Rate adaption
Dual-latency
Seamless Rate Adaption (SRA)
INP: up to 16 symbols
PTM mode
G.INP
PhyR configurable
ADSL Compliance
ITU-T G.992.1 (G.dmt) compliant
ITU-T G.992.2 (G.lite) compliant
ITU-T G.992.3 (ADSL2) compliant
ITU-T G.992.5 (ADSL2+) compliant
Reach-Extended ADSL (RE ADSL)
Seamless Rate Adaption (SRA)
Support VC-based and LLC-based multiplexing
WLAN
IEEE 802.11 b/g/n compliance
Frequency: 2.4 GHz
Data rate: 300 Mbps
WPA/WPA-PSK, WPA2/WPA2-PSK
WEP data encryption 64/128 bit
Wireless Protected Setup (WPS)
Multi SSID (up to 4) and hidden SSID support
USB
File sharing
3G backup support
Bridge/Router
PPPoE (RFC2516)
PPPoA (RFC2364)
DHCP client/server/relay
DNS proxy
Dynamic DNS
RIP I/RIP II supported
UPnP
Static/policy route
QoS classification route
Firewall/Security
PAP and CHAP support
MS-CHAPv1 and v2 support
Stateful Packet Inspection (SPI)
DoS Attack Prevention
Parental Control
QoS
Queuing and scheduling
Queue management
Management
Web GUI
Command Line Interpreter (CLI) via SSH or Telnet
Firmware upgrade via Web/FTP/TFTP
DSL forum TR-064, 069, 098,111
Configurable access control for remote management
Hardware Specifications
WAN:
One RJ-11 port (VMG1312-B10A) for VDSL/ADSL2+ over POTS
One RJ-45 port (VMG1312-B30A) for VDSL/ADSL2+ over ISDN
LAN: Four Fast Ethernet ports
WLAN: Two internal antennas
USB: One for USB2.0 host interface
WLAN/WPS button: One real button for WLAN on/off and WPS configuration
Reset/Restore button: One real button for restore factory default settings
Status LED indicator: Power, Ethernet, DSL, Internet, WLAN/WPS, USB
Physical Specifications
Item dimensions (W x D x H):186 x 121 x 39 mm (7.32” x 4.76” x 1.54”)
Item weight: 245 g (0.54 lb.)
Packing dimensions (W x D x H):300 x 195 x 50 mm (11.81” x 7.68” x 1.97”)
Packing weight: 540 g (1.19 lb.)
Environmental Specifications
Operating Environment
Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 20% to 95% RH (Non-condensing)
Storage Environment
Temperature: -30°C to 60°C (-22°F to 140°F)
Humidity: 20% to 95% RH (Non-condensing)
Certification
EMC: CE, FCC
Safety: CE
|
|
|
| |
|
|
|
